If you can not even PING the box - then yeah is highly unlikely FTP is going to work! ) You need to understand what is blocking your ability to even ping. That is, data from any associated device on the 802.11a cannot send data to or receive data from another device on the 802.11g network through the Access Point. If this is disabled, a partition is created between the networks within the Access Point. When this is enabled, devices on the 802.11a network are able to exchange data with devices on the 802.11g network through the Access Point. Wireless devices can still send data to the Ethernet. If this is disabled, all data from the Ethernet to associated wireless devices is blocked. When this is enabled there is no barrier between the data flow from the Ethernet to wireless devices connected to the Access Point. If this is disabled, wireless stations of the selected band (802.11a 0r 802.11g) are not allowed to exchange data through the Access Point. When this is enabled there is no barrier between communication among wireless stations connecting to the Access Point. The different makers call it different things, AP or Client isolation, WLAN partition "cant setup a ftp on my notebook trough wireless"Īs I said before its quite common for wireless routers as a security feature to block access between wireless clients, and or its possible to block wireless clients from talking to the wired clients or vice versa, etc. You need to verify that the ftp server software is listening on your machines local IP address, you say you can connect from the machine itself - are you just connecting to its 127.0.0.1 address or the name localhost? You say you can not ping this machine from another machine on your network - this could point to a firewall issue or maybe a double nat setup.Īre all machines connected to the same router? Or do you have another router in the network? Also is the machine wired or wireless to your network? Are the other machines wired or wireless? Quite often a wireless router can block wireless machines from talking to other wireless machines (called ap or client isolation as an example) If it then works - you know that is config issue with this software. I would suggest you at least for testing disable any and all software firewalls/antivirus/security software on both machines your wanting to test with - both the server and the client. I rarely see a point to running software firewalls on machines behind a nat router - more often then not just causes the users issues. If your using the local name that resolves to a local IP, or the local ip from another local machine and its not working you need to verify that any local software firewalls or antivirus software allows for this - quite often antivirus can block access to ftp. IE coming from machine on your local network trying to go to a public IP or public FQDN and then your router sending it right back (loopback). # Access the FTP user's local directory on the PC and check the vrpcfg.zip file.So lets repeat the question are you trying to access the ftp server using its LOCAL ip, say 192.168.1.100 from machine 192.168.1.101 or are you trying to access it by name? ftpservermachine or some outside FQDN say or its public IP address?Īs stated making loopback connections quite often does not work (depends on the router supporting this feature or not). # Run the dir command on the FTP server to check the file. The default FTP user's local directory on the Windows XP operating system is C:\Documents and Settings\Administrator. Before uploading and downloading files, obtain the local directory on the client. The file to be uploaded and the vrpcfg.zip file to be downloaded are stored in the local directory on the FTP client. ftp> get vrpcfg.zipġ50 Opening BINARY mode data connection for vrpcfg.zip.įtp: 1257 bytes received in 0.03Seconds 40.55Kbytes/sec. ftp> put ġ50 Opening BINARY mode data connection for įtp: 23876556 bytes sent in 25.35Seconds 560.79Kbytes/sec. Upload to and download vrpcfg.zip from the FTP server.C:\Documents and Settings\Administrator> ftp 10.136.23.5 Connect to the FTP server from the PC as user admin1234 whose password is and transfer files in binary mode.Īssume that the PC runs the Windows XP operating system.Save the vrpcfg.zip file on the FTP server.local-user admin1234 service-type ftp local-user admin1234 ftp-directory flash:/ local-user admin1234 password irreversible-cipher FTP_Server-aaa] local-user admin1234 privilege level 15 Configure the FTP function and FTP user information on the FTP server.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |